IBM 783722U, Инструкция по установке и эксплуатации

Страница: 77 / 154

See “Power and signal cables for internal drives” on page 69 for more cabling
information.
16. If you have another drive to install or remove, do so now.
17. Reinstall the fan cage assembly. Align the fan cage assembly over the fan
cage assembly slot and with the connector on the system board. Lower the fan
cage assembly into the chassis and press down firmly until the fan cage
assembly is seated firmly in place.
18. Rotate the power-supply cage assembly back into the server. Press the
power-supply cage release tab and rotate the power-supply cage assembly
into the chassis.
19. Close the bezel.
If you have other options to install or remove, do so now; otherwise go to
“Completing the installation” on page 97.
Installing an optional tape drive
To install a optional tape drive, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 32.
2. Turn off the server and peripheral devices, and disconnect the power cords
and all external cables.
3. Unlock the left-side cover.
4. Remove the left-side cover (see “Removing the left-side cover” on page 36.
5. Open the bezel. Place your finger on the pull point area on the left side of the
bezel door and rotate it away from the server.
Chapter 2. Installing optional devices
59