IBM 783722U, Инструкция по установке и эксплуатации

Страница: 73 / 154

Installing a DVD drive
To install a DVD drive, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 32.
2. Turn off the server and peripheral devices, and disconnect the power cords
and all external cables.
3. Unlock the left-side cover.
4. Remove the left-side cover (see “Removing the left-side cover” on page 36).
5. Open the bezel. Place your finger on the pull point area on the left side of the
bezel door and rotate it away from the server.
6. Remove the EMC shield from the bay in which you want to install the drive.
Note: If you are installing a drive that contains a laser, observe the following
safety precaution.
Chapter 2. Installing optional devices
55