IBM 7015-R30, Инструкция по установке и обслуживанию

Страница: 84 / 300

2-50
Service Guide
3. From this menu, enter
4
. to select the MISCELLANEOUS PARAMETERS menu, which is
similar to the following:
MISCELLANEOUS PARAMETERS
0> BUMP CONSOLE –> Present
1> AUTOSERVICE IPL –> Disabled
2> DIAL_OUT AUTHORIZATION –> Disabled
3> FAST IPL –> Enabled
4> SET MODE TO NORMAL WHEN BOOTING –> Disabled
5> BOOT MULTI–USER AIX IN SERVICE –> Disabled
6> SERVICE LINE SPEED –> 1200 Baud
7> MAINTENANCE PASSWORD
8> CUSTOMER MAINTENANCE PASSWORD
9> ELECTRONIC MODE SWITCH FROM SERVICE LINE –> Disabled
SELECT [x:exit]:
4. Check option 5 in this menu (BOOT MULTI-USER AIX IN SERVICE). If it is enabled,
enter
5
, and the flag should be changed to disabled.
5. Have another look at the option to make sure it is disabled. Now you are ready to boot off
the SCSI device, off a tape drive for example.
6. Insert the bootable tape into the tape drive.
7. Exit back to the main MAINTENANCE MENU.
8. Enter
6
in the MAINTENANCE MENU to select the SYSTEM BOOT menu, which is
similar to the following:
SYSTEM BOOT
0> BOOT FROM LIST
1> BOOT FROM NETWORK
2> BOOT FROM SCSI DEVICE
SELECT [x:exit]:
9. Enter
2
to boot from an SCSI device. The menu that appears enables you to specify the
SCSI device by using the location code.