IBM 7015-R30, Инструкция по установке и обслуживанию

Страница: 63 / 300

Using SystemGuard
2-29
0 Displays the build test menu, which enables you to specify the test list (see
“Build Test List” below).
1 Displays and enables modification of the tests in the build list (see page
2-31).
2 Deletes the tests in the build list, after operator confirmation. Attempting to
delete tests from an empty list causes an error message to be displayed.
3 Runs selected tests (see page 2-32).
4 Displays an error report.
x Exits this menu and returns to the MAINTENANCE MENU.
Build Test List
This command is used to build a test list, which is a sequence of tests to be run. To build a
test list, perform the following steps:
1. Enter
0
from the OFF-LINE TESTS menu to display the following menu.
BUILD TEST LIST
GROUP DESCRIPTION GROUP DESCRIPTION
01 BUMP QUICK IO 03 DIRECT IO
04 CPU 05 DCB AND MEMORY
06 INTERRUPT 11 MCA
20 MULTIPROCESSOR
COMMANDS: nn> SELECT GROUP
* > ADD ALL AVAILABLE TEST TO TEST LIST
SELECT [x:exit]:
Note: For a description of the test groups, see page A-3.
2. Select a test group of your choice by entering the group ID. For example, to select the
interrupt test group, enter
06
.
Note: Use the slash ( / ) character to separate different test groups. For example, enter
01/03/11
specify the BUMP Quick IO, Direct IO, and MCA test groups with default
parameter values.