IBM 4400 Series Скачать руководство пользователя страница 189 | Manualshive

Страница: 189 / 326

IBM 4400 Series Скачать руководство пользователя страница 189

Configuring A Router Definition With ADDTCPRTE

189

Configuring A Router Definition With
ADDTCPRTE

If necessary, use the ADDTCPRTE command to create a route
definition. This is required if the printer is somewhere other than on
a local segment and must cross bridges.

Configuring A Local Domain And Hostname

The AS/400 print commands, described in “Setting Up Printing For
ASCII Files” on page 190, require a local name and hostname. If
you have already configured LAN attached TCP/IP printers on the
AS/400 system, you will have a local domain name and hostname
configured on the system.

NOTE: If you already have a local domain name and hostname

configured on the system, do not change your setup.

If the local domain name and hostname file is empty, the file must
be set up. This control file information is used to determine if a print
request comes from an authorized host.

To configure the local domain and hostname, you will run the
CFGTCP command and select Option “12” from the menu. Enter a
local domain name, such as

city.company.com

. Enter a local

hostname, such as

as400-01

. This is the name of your AS/400

system and must match the hostname for your system in the host
entry table. Refer to “Configuring A TCP/IP Host Table Entry” for
more information.

NOTE: If the printer and AS/400 are not on the same local LAN

segment, use CFGTCP Option 2 to verify that there is a
route defined in the TCP/IP route list.

Configuring A TCP/IP Host Table Entry

Although creating a TCP/IP host table entry is optional, it is a good
idea to take this step. Add the AS/400 name and the IP address of
the LAN adapter to the “Host Table Entries.”

«
...
187
188
189
190
191
...
»

Содержание 4400 Series







































































































































































































































































































































Отзывы:

Нет отзывов