IBM 4400 Series, Руководство пользователя

Страница: 151 / 326

Adjusting Polling Time (NDS and Bindery Setups)
151
Adjusting Polling Time
(NDS and Bindery Setups)
To set the poll time the Ethernet Interface will use when checking
for new jobs under a PSERVER setup:
Netware 4.x and 5.x
1. Log in to Netware Administrator as a user with security equal to
“Admin” on your Novell host.
2. Double click the printer object for which you wish to change the
poll time. This will bring up the printer object detail pages.
3. Click “Configuration” to display the configuration page.
4. Change the “Service Interval” to the desired number (in
seconds).
NOTE: You may also want to change the “Service mode for forms”
to “Change forms as needed.” If you do not do this, the
Ethernet Interface will need to poll the file server twice as
much to get all the information it needs.
5. Repower the Ethernet Interface by turning the printer off and on
to make the changes take effect.
Netware 3.x
1. Log in to PCONSOLE on your Novell host as
supervisor
.
2. Select “Print Server Information” from the main menu and press
ENTER.
3. Select the print server you have been using for your PSERVER
setup and press ENTER. By default, this will be “M_xxxxxx”
where “xxxxxx” equals the last six digits of the print server’s
Ethernet address found on the bottom of the device
(e.g., “M_091C1A”).
4. Select “Print Server Configuration” from the menu that displays.
5. Select “Printer Configuration” from the next menu to display a
list of configured printers.