IBM 4247 - Model 001 B/W Dot-matrix Printer, Руководство пользователя

Страница: 75 / 454

PA2 Function
This PA2 function is valid when the Format/Online indicator is on and the printer is
not ready. The PA2 function is defined by the host program as a special operator
request.
Pressing PA2 sends a message to the computer or controller. The printer displays:
This message disappears when the host accepts the printer input.
Press Start to activate the PA2 response.
Note: See your computer operator or programmer for more information.
ð62 PA2 SELECTED
Return Function:
Pressing Return in the Configuration Menu returns to the previous level of the
menu, unless the printer already displays:
If Configuration Menu is displayed, the printer exits the menu and becomes not
ready.
Note: If you have made configuration changes and have not saved them in a
Custom Set, the display will prompt you to save the changes. If you are in the
Operator Print Tests Menu and a test is not running, pressing the Return key will
exit the Test Menu and make the printer
not ready.
CONFIGURATION MENU
Configuration Storage
Hex Print
H e x
P r i n t
This function is valid only when the printer is not ready.
Use the Hex Print function to print all data in hexadecimal code.
Press Hex Print to activate this function. The printer displays:
Press Start after you press Hex Print to cause all data to print in hexadecimal
codes.
This function remains active until you press Stop or turn the printer Off (O).
ð26 HEX PRINT MODE ACTIVE
Chapter 2. Understanding the Operator Panel
2-11