IBM 4247 - Model 001 B/W Dot-matrix Printer, Руководство пользователя

Страница: 392 / 454

Problem: Ribbon smudging forms
1: The ribbon is twisted or folded.
Solution: Try moving the print head back and forth while turning the ribbon
advance knob. If the ribbon advance knob does not turn, replace the ribbon.
(See “Removing the Ribbon Cartridge” in Chapter 19, “Supplies, Optional
Features, and Maintenance.”)
2: The Automatic Forms Thickness Adjustment (AFTA) setting for the paper source
|
you are using needs to be increased. Paper must be loaded for this adjustment
|
to be effective.
Solution: See the procedure for adjusting the forms thickness setting through
the operator panel in Chapter 11, “Printer Adjustments.”
3: The ribbon cartridge is defective.
Solution: Replace the ribbon cartridge. See “Removing the Ribbon Cartridge”
in Chapter 19, “Supplies, Optional Features, and Maintenance.”
4: A new ribbon is over-inked.
Solution: Replace the ribbon. See “Removing the Ribbon Cartridge” in
Chapter 19, “Supplies, Optional Features, and Maintenance.”
Problem: Printing is too light or partial characters print
1: The Automatic Forms Thickness Adjustment (AFTA) setting for the paper source
|
you are using needs to be changed. Paper must be loaded for this adjustment
|
to be effective.
Solution: See the procedure for adjusting the forms thickness setting through
the operator panel in Chapter 11, “Printer Adjustments.”
3: The ribbon guide is seated incorrectly or the white snap arm is not snapped in
place.
Solution: Remove the ribbon and reinstall it. See “Installing the Ribbon
Cartridge” in Chapter 19, “Supplies, Optional Features, and Maintenance.”
20-26
001, 002 User’s Guide