IBM 4247 - Model 001 B/W Dot-matrix Printer, Руководство пользователя

Страница: 145 / 454

Printer Compatibility 7 (Automatic Function After End of Print Buffer)
You can set this value to:
Standard (Default) The printer will automatically start a new line after the data in
the print buffer has printed, unless a New Line, Carriage
Return, or Form Feed was the last function executed.
Alternate The printer will automatically execute a form feed after the
data in the print buffer has printed, unless a Form Feed
command was the last function executed.
Note: The printer performs a partial reset to put any change to this parameter
value into effect when you exit the Configuration Menu with Start or Return.
Buffered data will be lost.
To change or check the automatic function after end of print buffer value, follow
these steps:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
5. Press Enter.
6. Press Scroll
↑
or Scroll
↓
until the printer displays
7. Press Enter to display the current value.
8. Press Scroll
↑
or Scroll
↓
until the desired value for automatic function after end
of print buffer is displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10. Use Start or Return to exit the Menu. See “Exiting the Configuration Menu” on
page 3-4.
CONFIGURATION MENU
Coax Configuration
Coax Configuration
Printer Compatibility
Printer Compatibility
7 (Auto at EOB)
Chapter 8. Coaxial Configuration
8-21