I/O TC5000, Руководство пользователя

Страница: 14 / 149

Setup the Thin Client
Step Two: Terminal Name & Network Properties
The above dialog box contains the field where you will enter the name this thin client will identified as to
the network. You may either accept the default name (which is based upon the MAC address of the
network interface component of the thin client), or enter a name of your choice.
N
OTE
: T
HE NAME MAY BE UP TO
15
CHARACTERS IN LENGTHS
,
AND MUST BEGIN WITH AN ALPHA
CHARACTER
.
9
You will next need to setup up the IP address of the thin client. This can either be done automatically
by DHCP, or you will need to manually enter a static IP address.
If the IP address is assigned automatically by DHCP, click the Next> button on this screen and skip
to Display Settings section below.
If the IP address is to be a static address (one that does not change), click the Network Properties
button to access the IP address setting screens.
T
IP
: T
O IMPLEMENT
LPD
PRINTING IT IS RECOMMENDED THAT YOU SPECIFY A STATIC
IP
ADDRESS FOR
THE THIN CLIENT
. T
HIS IS NECESSARY BECAUSE
,
ON THE SERVER
-
SIDE YOU MUST SPECIFY THE
IP
ADDRESS OF THE THIN CLIENT
. I
F YOU MUST USE
DHCP,
THEN IT IS PREFERABLE THAT YOU
RESERVE AN
IP
ADDRESS ON THE
DHCP
SERVER
,
FOR THE THIN CLIENT THAT YOU PLAN TO CONFIGURE
AS THE
LPD
SERVER
.
IP Address
N
OTE
: I
F THE
IP
ADDRESS IS TO BE SET BY
DHCP,
SKIP THIS STEP AS THE THIN CLIENT DEFAULTS TO
DHCP
FOR ADDRESSING
.
9
Thin Client User’s Guide 14