hymer ERIBA Touring 2012, Инструкция по эксплуатации

Страница: 61 / 158

61
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
Living 6
6.10.4 Seating group with bed 1400 x 1900
„
Slightly lift the front of the table-top (Fig. 42,3).
„
Loosen the table leg (Fig. 42,6) out of the locking device and fold it against
the bottom of the table.
„
Lift the table-top by approx. 45°, remove it out of the mounting rail
(Fig. 42,4) and place it to the side or push it into the holder. The table is not
required for the sleeping conversion.
„
Release bed leg (Fig. 43,7) and turn it a quarter turn.
„
Ensure that the bed leg is correctly placed on the bedding box (Fig. 43,5)
opposite.
„
Lightly lift up the two seat cushions (Fig. 43,2) and pull them to the middle.
„
Insert the back cushions (Fig. 44,1) between the seat cushions (Fig. 44,2)
and the exterior wall.
„
Push the table-top (Fig. 44,3) under the bed.
Fig. 42 Prior to conversion
Fig. 43 During conversion
Fig. 44 After conversion
1 Back cushion
2 Seat cushion
3 Table-top
4 Mounting rail
5 Bedding box
6 Table leg
7 Bed leg