hymer ERIBA Touring 2012, Инструкция по эксплуатации

Страница: 55 / 158

55
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
Living 6
Adjusting the height of the
table leg:
„
Insert the table in the upper retainer.
„
Undo the knurled screw (Fig. 26,2).
„
Raise or lower the table-top until it is level. In the process the table leg
extension (Fig. 26,1) slides out or in.
„
Hold the table-top level and re-tighten the knurled screw.
6.7.3 Folding table Troll single bed seating group
Putting up:
„
Fold the slatted frame in the right bench seat (Fig. 27,1) upwards.
The gas-pressure springs hold the slatted frame open.
„
Carefully remove the folding table (Fig. 27,3) from the holder (Fig. 27,2).
„
Press the slatted frame downwards against the resistance of the gas-pres-
sure spring.
„
Place the folding table with the legs upwards onto the seat cushions.
„
Fold the legs (Fig. 28,5) one after the other outwards against the resistance
of the springs (Fig. 28,4) until the retaining clips (Fig. 28,1) engage in the
hooks (Fig. 28,2) of the guides (Fig. 28,3).
„
Carefully turn round the folding table and place it between the single beds.
Fig. 26 Height setting suspension
table
Z
Before commencing the journey, always retract the folding table and store
it in the holder provided for this purpose.
Fig. 27 Folding table in the holder Fig. 28 Folding table, folding mecha-
nism