hymer ERIBA Touring 2012, Инструкция по эксплуатации

Страница: 112 / 158

112
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
11 Care
Blood Mix 2 tablespoons of salt and 1 litre of water. Moisten the mark and dab with
a dry cloth. Dab stubborn marks with ammonia solution.
Ballpen, ink Gently dab the mark with a cloth moistened with cleaner's naphtha. Turn the
cloth frequently so that the mark only comes into contact with a clean part of
the cloth.
Mud Carefully remove as much mud as possible with a blunt knife or a spatula.
Allow the mud to dry and then remove it with a vacuum cleaner. For stubborn
marks, use only ordinary water-based cleaning agents. Alternatively, mix
2 tablespoons of ammonia solution with 1 litre of water. Gently dab the mark
with a cloth moistened with this solution. Turn the cloth frequently so that the
mark only comes into contact with a clean part of the cloth.
Pencil Use only mild, water-free and clean textile cleaning agents. Moisten a cloth
with the agent. Gently dab the mark with a cloth moistened with this solution.
Turn the cloth frequently so that the mark only comes into contact with a clean
part of the cloth.
Vomit Carefully clean up the vomit and wash it out with cold water. Use only ordinary
water-based cleaning agents. Alternatively, mix 2 tablespoons of ammoniac
with 1 litre of water. Gently dab the mark with a cloth moistened with this solu-
tion. Turn the cloth frequently so that the mark only comes into contact with a
clean part of the cloth.
11.4 Water system
11.4.1 Cleaning the water canister or the water tank
„
Empty the water canister or water tank and close the drainage opening of
the water tank.
„
Remove the cap of the water canister or the water tank.
„
Fill water canister or water tank with water and some washing-up liquid (do
not use any scourers).
„
Using a trade standard brush for washing dishes, scrub the water canister
or the water tank until there is no longer any visible deposit.
„
Scrub also the pump housing.
„
Rinse water canister or water tank with copious amounts of drinking water.
11.4.2 Cleaning the water pipes
„
Empty the water system.
„
Close all drain holes and drain cocks.
„
Fill mixture of water and cleaning agent into the water canister or water
tank. Observe the manufacturer's instructions regarding the mixing ratio.
Z
Only use suitable cleaning agents as sold by the specialist trade.
Z
Collect any emerging mixture of water and cleaning agent for correct dis-
posal.