hymer ERIBA Touring 2012, Инструкция по эксплуатации

Страница: 30 / 158

30
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
3 Before the journey
„
Turn handwheel in a clockwise direction until it can be felt and heard that
the torque limiting mechanism grates.
„
Push the stabilising lever down until the marking on the stabilising lever is
aligned with that on the stabilising housing (Fig. 2,5).
3.3.3 WS 3000 D stabiliser
Connecting:
„
Pull the coupling handle (Fig. 3,1) upwards into position "Open" (Fig. 3,2).
Stabiliser is open.
„
Set down the open stabiliser on the caravan ball of the towing vehicle and
release the coupling handle. The handle glides automatically back to its ini-
tial position (Fig. 3,3).
„
In addition, push the coupling handle down with your hand (not with your
foot). Closing and securing is carried out automatically.
„
Conduct a visual inspection: The caravan ball must not be visible in the
attached state.
„
Activate the stabilising mechanism. To do this, press the coupling handle
downwards (Fig. 3,4) from the closed position (Fig. 3,3) to its stop limit.
To deactivate the stabilisation mechanism, e.g. for manoeuvring, pull the cou-
pling handle (Fig. 3,1) slowly upward to the closed position (Fig. 3,3).
3.4 Detaching
Detaching:
„
Apply the caravan handbrake.
„
Place the wheel chocks behind both of the wheels.
„
Remove the connector plug of the caravan from the towing vehicle socket
and insert it in the holder on the drawbar.
„
Remove the breakaway cable from the towing vehicle.
„
Crank the jockey wheel down until it is set firmly on the ground. Now loosen
the caravan coupling.
„
Using the jockey wheel, lift the drawbar until the towing vehicle can be
driven away without risk.
Fig. 3 WS 3000 D stabiliser
X
Care is to be taken when connecting and detaching a trailer. Risk of acci-
dent and injury!
X
In addition, observe the safety instructions with respect to connecting
included in this instruction manual.