hymer ERIBA Touring 2012, Инструкция по эксплуатации

Страница: 56 / 158

56
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
6 Living
Removal:
„
Carefully turn the folding table round and place it with the legs upwards
onto the seat cushions.
„
Press the retaining clips (Fig. 28,1) on both legs one after the other from
the hook (Fig. 28,2) of the guide (Fig. 28,3) and fully retract the leg
(Fig. 28,5).
The retaining clip is kept in the closed position by the spring (Fig. 28,4).
„
Fold the slatted frame in the right bench seat (Fig. 27,1) upwards.
The gas-pressure springs hold the slatted frame open.
„
Slide the folding table with the legs facing downwards into the holder on the
slatted frame (Fig. 27).
„
Press the slatted frame downwards against the resistance of the gas-pres-
sure spring.
Extending the table surface:
„
Pull the complete cover plate of the bedside locker (Fig. 29,2) forwards.
„
Fold the upper part of the cover plate (Fig. 29,1) backwards (Fig. 29).
6.8 Extending the Troll single bed seating group
„
Place folding table to the side.
„
Lift the bedside locker at the front by approx. 45°, remove it out of the
mounting rail and place to the side.
„
Insert the additional cushion (Fig. 30,1).
„
Place the folding table again to its original location.
Fig. 29 Folding table, bedside locker
Fig. 30 Seating group after extending