hymer ERIBA Touring 2012, Инструкция по эксплуатации

Страница: 58 / 158

58
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
6 Living
6.10.1 Front seating group
„
Place the seat cushions (Fig. 32,2 and 4) in an upright position.
„
Slightly raise the front of the table-top (Fig. 32,3).
„
Release the locking device fitted to the table leg (Fig. 32,8) and fold the
lower half of the table leg backwards by 90°.
„
Raise the table-top (Fig. 32,3) by approx. 45°, remove it from the upper
mounting rail (Fig. 32,6) and hold it at an angle of 45°.
„
Insert the table-top (Fig. 33,3) at an angle of 45° degrees into the lower
mounting rail (Fig. 33,9) and place on the ground with the table leg
(Fig. 33,8) folded.
„
Pull out the bedding box extension (Fig. 33,10).
„
Place the back cushions (Fig. 34,1 and 5) between the two seat cushions
(Fig. 34,2 and 4). Pay attention to the different lengths.
„
Place the additional cushion (Fig. 34,11) ahead of the short back cushion
(Fig. 34,5) and the short seat cushion (Fig. 34,4).
Fig. 32 Prior to conversion
Fig. 33 During conversion
Fig. 34 After conversion
1 Back cushion, long
2 Seat cushion, long
3 Table-top
4 Seat cushion, short
5 Back cushion, short
6 Upper mounting rail
7 Bedding box
8 Table leg
9 Lower mounting rail
10 Bedding box extension
11 Additional cushion