hymer ERIBA Touring 2012, Инструкция по эксплуатации

Страница: 91 / 158

91
Touring - 04/11-1 - englisch (EN) - 2048869 - HYW-0102-09EN
Appliances 9
Gas operation The boiler is operated exclusively with gas.
Switching on:
„
Remove cap from waste gas vent.
„
Open the regulator tap on the gas bottle and the gas isolator tap "Boiler".
„
Set the rotary switch (Fig. 78,3) to " " (Fig. 78,5). The green "Operation"
indicator lamp illuminates the knob (Fig. 78,1).
„
Adjust the knob (Fig. 78,1) to the required water temperature.
The red indicator lamp (Fig. 78,2) illuminates when there is a fault (see
chapter 14).
Switching off:
„
Set the rotary switch (Fig. 78,3) on the operating unit (Fig. 78) to " "
(Fig. 78,4).
„
Close the gas isolator tap "Boiler" and the regulator tap on the gas bottle.
„
Place cap on waste gas vent.
The red indicator lamp (Fig. 78,2) illuminates when there is a fault (see
chapter 14).
240 V electrical operation The boiler is operated exclusively with electricity.
Switching on:
„
Connect the vehicle to the external 240 V power supply and switch on the
240 V automatic circuit breaker.
„
Set flip switch (Fig. 79,1) to on. The indicator lamp on the switch is illumi-
nated. The water in the boiler is heated up to 65 °C.
Fig. 78 Operating unit for Truma boiler
(gas operation)
1 Temperature control knob
2 Red indicator lamp "Fault"
3 Rotary switch
4 Off
5 On
Z
240 V electrical operation is only possible when the vehicle is connected to
the 240 V power supply.
Fig. 79 Flip switch for Truma boiler
(240 V electrical operation)