Page 54
8.9
Cleaning connection hoses and cylinder
base
All connection hoses should be free of deposits and under good
conditions.
As wellcheck all connections of the cylinder base (11) and the
steam hose adapter (2) for deposits and remove if neccessary.
8.10
Checking Cable Screw Connections,
Heater Element Wires
»
Check that all cable screw connections are securely
tightened
»
Ensure that heating element cable is not dammaged.
Warning:
Loose cable connections cause excessive contact
resistance and overheating of contact surfaces.
8.11
Operational Check
»
Start up the unit and operate for a few minutes, ideally
at maximum output.
»
Check safety devices.
»
Check hose connections for possible leaks.
8.12
Dismantling
Once the steam humidifier will no longer be used, dismantle
(demolish or scrap) it by following the installation procedures in
reverse order.
Warning:
Dismantling of the unit may only be performed by
qualified personnel. Electrical dismantling may only be per-
formed by trained electricians.
Obey the safety guidelines in section “Safety Instructions,” espe-
cially the guidelines for disposal.
Содержание HC02Kit
Страница 1: ...HCK END Electric Heater Steam Humidifier HeaterCompact Kit HCK END HCK EN Manual...
Страница 29: ...Page 29 Drill Pattern DN40 not to scale Note Due to variable print media the dimensions are not to scale...
Страница 59: ......
Страница 61: ...Page 61 12 Exploded View 27 2 28 29 15 30 42 9 13 41 30 31 3 12 7 5 6 16 8 21 17 14 32 10 18 40 11 23 22 43...