HygroMatik HC02Kit, Руководство пользователя

Страница: 11 / 62

Page 11
4. Mechanical Installation
Warning : Installation of this unit should be performed by quali-
fied personnel only. HygroMatik accept no liability for damage
due to faulty installation.
Obey all safety instructions and warnings on the unit. During
installation the unit must be disconnected from its power supply.
Accessory equipment may not be installed on or in the unit with-
out prior written consent from HygroMatik. Otherwise the war-
ranty is void.
Warning: If the installation of this unit is attempted by only one
person there is a risk that the unit will drop down. We propose to
carry out the installation by two persons.
4.1 Steam Humidifier - environmental conditi-
ons
Note: When selecting the location for steam humidifier installa-
tion, be aware of the following:
•
Ambient temperature must be b5 and +40 °C.
•
Relative humidity may not exceed 80% RH.
•
Observe clearances specified in the diagrams below to
ensure adequate ventilation.
•
An Installation in a closed room requires aeration and if
neccessary temperature conditioning in order to reach
the above mentioned environmental conditions.
•
HygroMatik humidifiers are not suitable for direct out-
door installation.
•
Install the steam humidifier as close as possible to the
steam manifold. Use only short lengths of steam and
condensate hose to ensure optimal performance.
•
Hoses must be laid at a constant 5-10% grade to uni-
formly prevent sags and kinks.
•
The back surface of the steam humidifier heats up dur-
ing operation (to max. 70°C). Take care that the con-
struction on which the unit is mounted is not made of
temperature-sensitive material.
•
Place the steam humidifier so that the unit is easily
accessible with sufficient space to perform mainte-
nance.
•
The unit’s protection class is IP20.