Huvitz CRK-1, Руководство по обслуживанию, Страница: 65 / 88

64 Auto Ref/Keratometer CRK-1 ------------------------------------------------------------------------------------------------
- COLOR
i. Dead Pixel color is selected as one of the White and Black.
ii. The selected Pixel color is printed on the screen.
-
EXIT
i. DPC Setup will exit.
3) White Dead Pixel of KER CCD Setup is as follows.
-
CAMERA Press to select KER CCD.
-
COLOR Select White Pixel Press.
-
If you press the joystick, Dead Pixel beginning of the search and discovery of th
e Dead Pixel count is displayed on the screen. Ten thousand days When Buffer
Full output with the message, DPC compensation will exceed the number of po
ssible Dead Pixel.
4) C in the same way and then Setup and then to the Dead Pixel.
-
KER CCD's White Pixel
-
KER CCD’s Black Pixel in
- COLOR CCD's White Pixel
- COLOR CCD’s Black Pixel in
5) After DPC Setup, engineer mode by pressing the SAVE SYS DATA is stored.
6) CRK-1 restarts, and were being corrected by the camera from the screen Dead Pixel
Check.