Hunter Douglas Douette PowerView, Установка Эксплуатация Уход

Страница: 10 / 44

INSTALLATION – OUTSIDE MOUNT
8
Mount the Headrail
■ ■
Mount the headrail into the installation brackets. Do not remove any components from the
headrail. Both end plates should remain attached to the ends of the headrail.
■ ➤
Carefully align the headrail with the end marks on the mounting surface. Headrail
position cannot easily be adjusted after the headrail is mounted. (Remember that the
end of the white gearbox is the end of the headrail on the stacking side.)
■ ➤
Place the front groove on the headrail onto the front lip of the installation brackets.
■ ➤
Rotate the rear of the headrail up and push back until the headrail snaps in place.
Proceed to “Install the Fabric Stack” on page 11.
Align Headrail with End Marks
Align End of
Gearbox with
End Mark
Snap in
Place
Place Groove onto
Front of Bracket