background image

Use and  

Care Guide 

Vanity Combo

 

Item# 1003 431 333
Item# 1003 431 343
Item# 1003 606 766
Item# 1003 606 761
Item# 1003 606 780
Item# 1003 606 777

 Model# PPAVLDVR18

Model# PPAVLCAB18

Model# PPAVLDVR24

Model# PPAVLCAB24

Model# PPAVLDVR30

Model# PPAVLCAB30

TOOLS REQUIRED

Hammer

Safety goggles

Phillips screwdriver

Power drill

Measuring tape

Wall hardware

Caulk/sealant

Level

HARDWARE INCLUDED

AA - Handle x 2

BB - Handle screw x 4

Installation

PREPARING FOR INSTALLATION 

NOTE:

 Before installation, make sure all parts 

are present. Compare parts with the Hardware 
Included list. If any part is missing or damaged, 
do not attempt to install the product.

 

Determine the desired mounting location, 
and mark the wall where the unit will be 
installed.

NOTE:

 For secure installation, the unit 

must be mounted to at least one wall stud. 

POSITIONING THE CABINET

 

Move the cabinet into place, and use wood 
shims to level the cabinet against the wall.

INSTALLING THE CABINET

 

For wall stud installation, insert #12 x 3 in. screws  
with washers into the stud locations (not included).

 

For drywall installation, drill holes at the appropriate 
locations and insert toggle bolts with washers (not included).

 

For concrete wall installation, drill 1/4 in. holes at the 
appropriate locations and insert #12 wall anchors,  
followed by #12 x 3 in. screws (not included).

INSTALLING THE VANITY TOP

IMPORTANT:

 Do not use plumber’s putty.

NOTE: 

The faucet, drain, and supply lines are not included. Install these 

parts to the vanity top according to the manufacturer’s instructions.

 

Apply silicone caulk/sealant (not included) to all four corners of the cabinet.

 

Place the vanity top onto the cabinet.

 

Position the top so that it has an equal amount of overhang on each side  
and use a level to ensure the vanity top surface is level.

 

Apply silicone onto the seam between the edge of the vanity top and the  
wall, smooth the bead, and allow to cure before use.

INSTALLING THE HARDWARE

 

Attach the handles (AA) to the cabinet with the provided screws (BB).

NOTE: 

Matching side and back splashes available, sold separately.  

To purchase, visit your local Home Depot store or go to homedepot.com.

BB

AA

HOMEDEPOT.COM     

Please contact 1-888-774-8062 for further assistance.

Отзывы: