35
Set up Sonar
Set up CHIRP (HELIX CHIRP GPS models only)
Use the instructions in this section to set up CHIRP sonar.
Turn on/off CHIRP
To use CHIRP sonar, CHIRP Mode must be turned on. To use traditional 2D sonar, turn off CHIRP Mode and see
Select Frequencies
for the 2D View
.
NOTE:
When CHIRP Mode is turned off, the CHIRP menus are removed from the Main Menu.
1.
Main Menu:
Press the MENU key twice. Select the
Sonar
tab.
2. Select CHIRP Mode.
3. Select On or Off. (Default = On)
Adjust CHIRP Frequencies
Use the instructions in this section to select the CHIRP beam frequencies that will be used for the 2D sonar views. You will first select
the CHIRP Display Frequency and then select the start and end frequencies using the CHIRP Frequency Spectrum. The CHIRP Display
Frequency options are determined by the connected CHIRP transducer.
NOTE:
CHIRP applies to the down beams only. Side Imaging beams cannot be selected for CHIRP. See
Sonar Overview: CHIRP Sonar
.
1.
Main Menu:
Press the MENU key twice. Select the
Sonar
tab.
2. Select CHIRP Display Frequency.
3. Press the RIGHT or LEFT Cursor keys to select a setting.
4. Press the DOWN Cursor key to select CHIRP Frequency Spectrum.
5.
Open the Submenu:
Press the RIGHT Cursor key.
6. Press the UP or DOWN Cursor keys to select a frequency menu.
7. Press the RIGHT or LEFT Cursor keys to select a setting.
8.
Repeat:
Repeat steps 6 through 8 to set additional frequency settings.
9.
Close the Submenu:
Press the EXIT key.
NOTE:
Accessory transducers may include additional menu options. For information about accessory transducers, visit our Web
site at
humminbird.com
.
CHIRP Display Frequency Options and Frequency Spectrums
The frequencies shown in this table apply to the transducer included with your control head.
Frequency
Option
HELIX CHIRP GPS
Frequency Spectrums
HELIX CHIRP DI GPS
Frequency Spectrums
HELIX CHIRP SI GPS
Frequency Spectrums
Medium
Frequency
75 kHz - 95 kHz
X
75 kHz - 95 kHz
Select Medium Frequency to
provide deep water returns.
Medium/High
Frequency
75 kHz - 95 kHz and
175 kHz - 225 kHz
X
75 kHz - 95 kHz and
175 kHz - 225 kHz
Select Medium/High Frequency
to provide deep water returns.
High Frequency
175 kHz - 225 kHz
185 kHz - 225 kHz
175 kHz - 225 kHz
Select High Frequency to provide
more detail at shallower depths.
High Frequency
(455 kHz)
X
440 kHz - 490 kHz
X
Select High Frequency (455 kHz) for
the most detail at shallow depths.
Содержание HELIX 10
