Humminbird HELIX 10 Скачать руководство пользователя страница 105

Страница: 105 / 191

105

Change the Chart Orientation and Motion Mode

Set the Bearing North Reference

North Reference allows you to have the bearing displayed as True North or Magnetic North.

Main Menu:

Press the MENU key twice. Select the

Nav

tab.

2. Select North Reference.

3. Select True North or Magnetic North.

Turn on/off Auto Zoom

Turn on Auto Zoom to zoom the Chart View automatically based on the speed of the boat. As the boat’s speed increases, the chart
range will increase.

NOTE:

The settings in this section do not apply to the Bird’s Eye View.

Main Menu (Advanced User Mode):

Press the MENU key twice. Select the

Chart

tab.

2. Select Auto Zoom.

3. Select On or Oﬀ.

Zoom In/Out:

If Auto Zoom is turned on, you can press the +/– ZOOM keys to see more or less of the view, and Auto Zoom will

resume after 20 seconds. To use only the +/– ZOOM keys to adjust the chart range, turn oﬀ Auto Zoom.

Turn on/off Auto Range

Turn on Auto Range to set the chart scale to the lowest range so that only the boat icon and the next waypoint in the route are shown.
If Auto Range is turned on, Auto Zoom will be turned oﬀ.

NOTE:

The settings in this section do not apply to the Bird’s Eye View.

Main Menu (Advanced User Mode):

Press the MENU key twice. Select the

Chart

tab.

2. Select Auto Range.

3. Select On or Oﬀ.

Zoom In/Out:

If Auto Range is turned on, you can press the +/– ZOOM keys to see more or less of the view, and Auto Range will

pause. To resume using Auto Range, press and hold the +/- ZOOM keys.

Содержание HELIX 10
































































































































































































Результаты поиска

Содержание HELIX 10

Отзывы:

Humminbird HELIX 10, Руководство по эксплуатации, Страница: 105 / 191

Результаты поиска

Содержание HELIX 10

Отзывы: