Humminbird HELIX 10 Скачать руководство пользователя страница 157

Страница: 157 / 191

157

AutoChart Live

Display the Current Track (optional)

It is helpful to display the current track so you can see where the boat has already traveled while you’re recording the map.

Main Menu:

Press the MENU key twice. Select the

Nav

tab.

2. Select Current Track. Press the RIGHT Cursor key.

3. Select Appearance. Press the RIGHT Cursor key.

4. Select Visibility. Press the RIGHT or LEFT Cursor key to select Visible.

Save:

Select Save. Press the RIGHT Cursor key.

Start a Sonar Recording for AutoChart PC (optional)

If you are planning to use AutoChart PC, start a sonar recording before you start recording your custom map.

Enable Sonar Recording

It is important to install an SD card and turn on the appropriate menus to enable Sonar Recording.

1. Install an SD card into the control head card slot.

Main Menu:

Press the MENU key twice. Select the

Views

tab.

3. Select Screen Snapshot and Recording View.

4. Select Visible.

Close:

Press the EXIT key repeatedly until the menu system is closed.

Start Recording

1. Display the Screen Snapshot and Recording View on-screen.

2. Press the MENU key.

3. Select Start Recording. Press the RIGHT Cursor key.

File Name:

A waypoint will also be created at the boat location, and the recording shares the same ﬁle name as the waypoint

(.SON).

Use Diﬀerent Views:

To use diﬀerent views on the control head and continue recording, press the EXIT key.

Not Available:

Taking screen snapshots and playback mode are not available during recording.

NOTE:

For more information, see

Screen Snapshots and Recordings

. Also, visit our Web site at

humminbird.com

to purchase

AutoChart PC and download the manual.

Содержание HELIX 10
































































































































































































Результаты поиска

Содержание HELIX 10

Отзывы:

Humminbird HELIX 10, Руководство по эксплуатации, Страница: 157 / 191

Результаты поиска

Содержание HELIX 10

Отзывы: