Humminbird HELIX 10 Скачать руководство пользователя страница 168

Страница: 168 / 191

168

Manage your Control Head

Start the Timer

Main Menu:

Press the MENU key twice. Select the

Alarms

tab.

2. Select Timer Setup.

3. Use the Cursor Control key to set the hours, minutes, and seconds.

4. To start the Timer immediately, select Start. Press the RIGHT Cursor key.

To save your settings and start the Timer at a later time, select Save. Press the RIGHT Cursor key.

NOTE:

The Timer can be displayed as a digital readout. See

Views: Display Digital Readouts

Change the Display Language

The available languages are determined by your Humminbird model.

Main Menu:

Press the MENU key twice. Select the

Setup

tab.

2. Select Language.

3. Press the RIGHT or LEFT Cursor keys to select a language.

Change Digital Readout Formats

Use the following instructions to customize the format for the digital readouts displayed on the control head. See

Views: Display

Digital Readouts

for more information.

Change the Digits Format

If you have Digital Readouts set to Boxes, you can change how the numbers are displayed.

Main Menu (Advanced User Mode):

Press the MENU key twice. Select the

Setup

tab.

2. Select Digits Format.

3. Press the RIGHT or LEFT Cursor keys to select a format.

Change Units of Measurement

Main Menu:

Press the MENU key twice. Select the

Setup

tab.

2. Select Units - Depth, Units - Distance, Units - Speed, etc., and select each unit setting as you prefer.

: Press the EXIT key.

NOTE:

The Units - Temp menu is only available in an international model.

Содержание HELIX 10
































































































































































































Результаты поиска

Содержание HELIX 10

Отзывы:

Humminbird HELIX 10, Руководство по эксплуатации, Страница: 168 / 191

Результаты поиска

Содержание HELIX 10

Отзывы: