HUM sat 805 Скачать руководство пользователя страница 64

Страница: 64 / 101

sat 805 Pulse Oximeter

Control

7.7.4

System Time (

Clock

)

The function sets the date and time of the unit. For a precise analysis of the stored monitoring data, it is
necessary to set the device time always correctly.

ATTENTION!

The user will need to adjust the time from summer to winter and vice versa manually!

Starting from the main menu, call:



Configuration



Clock

Select the first digit to be modified with
the trim knob.

Adjust the number with the trim knob.

Repeat this sequence for each number
to be modified.

Confirm this setting with

Accept.

NOTICE!

The clock time does not run while

setting it. For that reason it makes sense

to set the clock time to a later point in

time, and then at precisely that point in

time press the trim knob to accept the

time and date.

Fig. 64: Setting the System Time

If you try to accept an invalid date (e.g.
30.02.07), the device responds with the
following message:

Attention!

Date is not

correct!

In that case no new date or time is set.

Fig. 65: Date is not correct

Содержание sat 805






































































































Результаты поиска

Содержание sat 805

Отзывы:

HUM sat 805, Руководство пользователя, Страница: 64 / 101

Результаты поиска

Содержание sat 805

Отзывы: