HUM sat 805 Скачать руководство пользователя страница 27

Страница: 27 / 101

sat 805 Pulse Oximeter

Shipping, Packaging and Storage

5.1

Shipping Inspection

Examine the delivery immediately upon receipt for completeness and possible shipping damage.

With visible external shipping damage do not accept delivery or only with reservation.

Indicate the extent of damage on the accompanying delivery document i.e. on the shipping agent’s

document. Start the claim procedure.

Report invisible damage immediately after discovery. Damage claims can only be processed during the valid
time period for claim acceptance.

5.2

Scope of Delivery

Please check the contents of the package immediately following receipt. If the items are missing, please
contact your medical equipment dealer immediately.

ATTENTION!

Never use other accessories than specified.

Scope of delivery:

Pulse oximeter sat 805

Plug-in power supply unit

Patient lead

One or several pulse oximetry sensors

NOTICE!

With regard to the sensors the actual scope of

delivery can be adjusted to the user requirements

and can differ from the pictured scope of delivery!

Fig. 8: Scope of Delivery

Содержание sat 805






































































































Результаты поиска

Содержание sat 805

Отзывы:

HUM sat 805, Руководство пользователя, Страница: 27 / 101

Результаты поиска

Содержание sat 805

Отзывы: