Hudson 1948 Commodore, Руководство по обслуживанию

Страница: 99 / 147

1. Lay a bead of Dolphinite sealer to the inside of the drain
trough for its entire length shown as (1), Insert A, Figure
137. To insure an even sealer, wad the corner of a cloth to
a size that may be inserted in the drain t r o u g h and wipe
trough for its entire length, taking care that only the excess
sealer is removed.
2. Loosen the end of the door opening weatherstrip at the
rear pillar (Insert B), and apply a bead of Dolphinite sealer
to the u n d e r s d e of the drain trough from the rear pillar
to the end of trough. Sealer must completely seal opening.
3. Re-cement loose end of door opening weatherseal and
finish by wiping off any excess sealer.
4. If it is necessary to seal around the quarter window reveal
moulding, apply a fine bead of Dolphinite sealer around
the outer contact of the quarter window reveal moulding
shown as (2), (Insert A). Force sealer into opening if
necessary to effect a complete seal.
5. Remove all excess sealer with mineral spirits and touch up
areas around sealer as required. Allow fifteen minutes for
sealer to set before applying paint. FIGURE 137
BODY MANUAL 94
REFERENCE
Source of
Information
Date Subject