Huawei Quidway S6500 Series, Руководство по управлению

Страница: 473 / 845

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches
Chapter 2 Qos Command
Huawei Technologies Proprietary
2-18
[Quidway-qosb-GigabitEthernet7/0/1] line-rate 10
2.1.15 mirroring-group
Syntax
mirroring-group groupId
{
inbound | outbound
}
mirroring-port-list
&<1-8>
mirrored-to monitor-port
undo mirroring-group groupId
View
System view
Parameter
groupid
: Port mirroring group ID, ranging from 1 to 20.
Inbound
: Performs monitoring to the packets received by interfaces.
outbound
: Performs monitoring to the packets sent by interfaces.
mirroring-port-list
: The list of Ethernet ports, means multiple Ethernet interfaces,
donated as
port-list
={ {
interface_type interface_num | interface_name
} [
to
{
interface_type interface_num | interface_name
} ] }&<1-8>. For detailed description of
interface_type
,
interface_num
,
interface_name
, please refer to
Command Manual –
Port.
” &<1-8>” means the previous parameters can be input 8 times at the most.
mirrored-to monitor-port
: Specifies monitoring ports.
Description
Using the
mirroring-group
command, you can configure port mirroring group. Using
the
undo mirroring-group
command, you can cancel the port mirroring group.
The switch supports multi-to-one port mirroring, that is to copy packets of many ports to
a monitoring port and perform monitoring. S6500 Series Switches configure port
mirroring function through the configuration of port mirroring group. You can configure
one monitoring port and multiple monitored ports in each port monitoring group,
meanwhile, you can specify the direction of the monitored packets.
S6500 Series Switches can be configured with 20 port mirroring groups at the most.
Some cards do not support port mirroring. If you configure port mirroring on these cards,
the system will prompt “Not support”.