Huawei Quidway S6500 Series, Руководство по управлению

Страница: 191 / 845

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
0
错误！表格结果无效。
Huawei Technologies Proprietary
1-16
For related commands, see ip route-static and display ip routing-table .
Example
# Delete all the static routes in the router.
[Quidway] delete static-routes all
Are you sure to delete all the unicast static routes?[Y/N]
1.2.2 ip route-static
Syntax
ip route-static ip-address { mask | mask-length } { interface-name | gateway-address }
[ preference preference-value ] [ reject | blackhole ]
undo ip route-static ip-address { mask | mask-length } [ interface-name |
gateway-address ] [ preference preference-value ] [ reject blackhole ]
View
system view
Parameter
ip-address : Destination IP address in dotted decimal notation.
mask : Mask.
mask-length: Mask length. Since "1" s in the 32-bit mask are required to be consecutive,
the mask in dotted decimal format can be replaced by mask-length , which is the
number of the consecutive "1" s in the mask.
interface-name : Specify the interface of the route . The packets that are sent to a NULL
interface, a kind of virtual interface, will be discarded immediately. Thus can decrease
the system load.
gateway-address : Specify the next hop IP address of the route.
preference-value : Preference level of the route in the range from 1 to 255.
reject : Indicate an unreachable route.
blackhole : Indicate a blackhole route.
Description
Using ip route-static command, you can configure a static route. Using undo ip
route-static command, you can delete the configured static route.
By default, the system can obtain the sub-net route directly connected with the router.
When configuring a static route, the default preference is 60. You can change the
default preference value of the static routes to be configured by using the command ip