Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-9
The
undo network
command is similar to the
undo rip work
command in terms of
function. But they are not identical. Their similarity is that the interface using either
command will not receive/transmit RIP routes. The difference between them is that, in
the case of
undo rip work
, other interfaces will still forward the routes of the interface
using the
undo rip work
command. In the case of
undo network
, other interfaces will
not forward the routes of the interface using this command and it seems that the
interface disappeared.
When the
network
command is used on an address, the effect is that the interface on
the network segment at this address is enabled. For example, the results of viewing the
network
129.102.1.1 with both the
display current-configuration
command and the
display rip
command are shown as the network 129.102.0.0.
For the related commands, see
rip work
.
Example
# Enable the RIP on the interface with the network address as 129.102.0.0.
[Quidway-rip] network 129.102.0.0
2.1.10 peer
Syntax
peer ip-address
undo peer ip-address
View
RIP view
Parameter
ip-address
: The interface IP address of the peer router, represented in the format of
dotted decimal.
Description
Using
peer
command, you can configure the sending destination address of the peer
device. Using
undo peer
command, you can cancel the set destination address.
By default, do not send RIP packet to any destination.
RIP exchanges routing information with non-broadcasting networks in unicast view.
This command specifies the sending destination address to fit some non-broadcast
networks. Usually, it is not recommended to use this command.
Example
# Specify the sending destination address 202.38.165.1.
Содержание Quidway S6500 Series
