Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-25
Field
Description
Mode
Master/Slave mode formed by negotiation in
exchanging DD packet
Priority
Priority of DR/BDR for neighbor election
DR
IP address of the interface of elected DR
BDR
IP address of the interface of elected BDR
Dead timer expires in 31s
If no hello packet received from the peer within this
interval, the peer will be considered to be invalid.
Neighbor has been up for
01:14:14
Time of neighbor connection
# View the brief information of every peer.
<Quidway> display ospf peer brief
OSPF Process 1 with Router ID 1.1.1.1
Neighbor Statistics
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.0 0 0 0 0 0 0 0 1 1
0.0.0.1 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 2 2
Table 3-11
Description of information generated by the command display ospf peer
brief
Field
Description
Area ID
Area ID
Down
Initial state for OSPF to establish neighbor relation, which indicates
that OSPF router does not receive the message from a certain
neighbor router within a period of time
Attempt
It is enabled in NBMA environment, such as Frame Relay, X.25 or
ATM. It indicates that OSPF router does not receive the message from
a certain neighbor router within a period of time, but still attempts to
send Hello packet to the adjacent routers for their communications with
a lower frequency.
Init
It indicates that OSPF router has received Hello packet from a
neighbor router, but its IP address is not contained in the Hello packet.
Therefore, a two-way communication between them has not been
established.
2-Way
It indicates that a two-way communication between OSPF router and
neighbor router has been established. DR and BDR can be selected in
this state (or higher state).
ExStart
In this state, the router determines the sequence number of initial
database description (DD) packet used for data exchange, so that it
can obtain the latest link state information
Содержание Quidway S6500 Series
