Huawei Quidway S6500 Series, Руководство по управлению

Страница: 508 / 845

Command Manual - STP
Quidway S6500 Series Ethernet Switches
Chapter 1 MSTP Configuration Commands
Huawei Technologies Proprietary
1-7
View
MST region view
Parameter
name : Specifies the MST region name of the switch with a character string not
exceeding 32 bytes.
Description
Using region-name command, you can configure the MST region name of a switch.
Using undo region-name command, you can restore the default MST region name.
By default, the MST region name of the switch is the switch MAC address in
hexadecimal notation.
The switch region name, together with VLAN mapping table of the MST region and
MSTP revision level, is used for determining the region to which the switch belongs.
For the related command, see instance, revision-level, check region-configuration ,
vlan-mapping modulo, active region-configuration .
Example
# Set the MST region name of the switch as huawei.
[Quidway-mst-region] region-name huawei
1.1.7 reset stp
Syntax
reset stp [ interface interface-list ]
View
User view
Parameter
interface-list : Ethernet port list, containing multiple Ethernet ports and expressed as
interface _list = { { interface_type interface_num | interface_name } [ to { interface_type
interface_num | interface_name } ] }&<1-10>. For detail descriptions of interface_type ,
interface_num and interface_name parameters, refer to the corresponding descriptions
in Port Command Manual. &<1-10> means that the preceding parameters can be
entered up to 10 times.
Description
Using reset stp command, you can reset the spanning tree statistics information.