Huawei Quidway S6500 Series, Руководство по управлению

Страница: 603 / 845

Command Manual - Security
Quidway S6500 Series Ethernet Switches
Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-37
How to calculate the value of
count
? Suppose RADIUS server connection will timeout
in T and the real-time accounting interval of NAS is t, then the integer part of the result
from dividing T by t is the value of
count
. Therefore, when applied, T is suggested the
numbers which can be divided exactly by t.
For the related command, see
radius scheme
Example
# Allow the real-time accounting request failing to be responded for up to 10 times.
[Quidway-radius-huawei] retry realtime-accounting 10
2.2.19 retry stop-accounting
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
RADIUS scheme view
Parameter
retry-times
: Specifies the maximal retransmission times after stopping accounting
request,. ranging from 10 to 65535. By default, the value is 500.
Description
Using
retry stop-accounting
command, you can configure the maximal
retransmission times after stopping accounting request . Using
undo retry
stop-accounting
command, you can restore the retransmission times to the default
value.
Because the stopping accounting request concerns account balance and will affect the
amount of charge, which is very important for both the user and ISP, NAS shall make its
best effort to send the message to RADIUS accounting server. Accordingly, if the
message from the switch to RADIUS accounting server has not been responded, the
switch shall save it in the local buffer and retransmit it until the server responds or
discard the messages after transmitting for specified times.
For the related commands, see
reset stop-accounting-buffer
,
radius scheme
,
display stop-accounting-buffer
.
Example
# Indicate that, when stopping accounting request for the RADIUS scheme “Huawei”,
the switch will retransmit the packets for up to 1000 times.
[Quidway-radius-huawei] retry stop-accounting 1000