Huawei Quidway S6500 Series, Руководство по управлению

Страница: 254 / 845

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-41
For the related commands, see ospf dr-priority .
Example
# Set the interface Vlan-interface 1 to NBMA type.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] ospf network-type nbma
3.1.39 ospf timer dead
Syntax
ospf timer dead seconds
undo ospf timer dead
View
Interface view
Parameter
seconds: Dead interval of the OSPF neighbor. It is in second and ranges from 1 to
65535.
Description
Using ospf timer dead command, you can configure the dead interval of the OSPF
peer. Using undo ospf timer dead command, you can restore the default value of the
dead interval of the peer.
By default, the dead interval for the OSPF peers of p2p and broadcast interfaces are
40 seconds, and for those of p2mp and nbma interfaces is 120 seconds.
The dead of OSPF peers means that within this interval, if no Hello message is
received from the peer, the peer will be considered to be invalid. The value of dead
seconds should be at least 4 times of that of the Hello seconds . The dead seconds for
the routers on the same network segment must be identical.
For the related commands, see ospf timer hello .
Example
# Set the peer dead on the interface Vlan-interface 1 to 80 seconds.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] ospf timer dead 80