Huawei Quidway S6500 Series, Руководство по управлению

Страница: 376 / 845

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Chapter 7 Route Capacity Configuration Commands
Huawei Technologies Proprietary
7-4
Using memory safety safety-value command, you can configure the safety value of
the Ethernet switch idle memory. If you use the memory auto-establish enable
command (the default configuration), the routing protocol connection that is forcibly
disconnected will automatically recover when the idle memory of the Ethernet switch
reaches this value. The safety-value in the command must be more than the current
idle memory lower limit, and otherwise the configuration will fail.
Using memory safety safety-value limit limit-value command, you can change both of
the safety value and lower limit of the Ethernet switch idle memory. The safety-value
must be more than the limit-value, otherwise the configuration will fail.
Using undo memory command, you can configure the safety value and the lower limit
of the Ethernet switch idle memory to the default configuration.
For the related commands, see memory auto-establish disable, memory
auto-establish enable and display memory limit .
Example
# Set the lower limit of the Ethernet switch idle memory to 2Mbytes and the safety value
to 4Mbytes.
[Quidway] memory safety 4 limit 2
7.1.4 memory auto-establish disable
Syntax
memory auto-establish disable
View
System view
Parameter
none
Description
Using memory auto-establish disable command, you can disable the routing protocol
connection that is forcibly disconnected to recover automatically when the idle memory
of the Ethernet switch reaches this value. Thus, connections of all the routing protocols
will not recover when the idle memory of the Ethernet switch recovers to a safety value.
In this case, you need to restart the routing protocol to recover the connections.
By default, when the idle memory of the Ethernet switch recovers to a safety value,
connections of all the routing protocols will always recover (when the idle memory of
the Ethernet switch reduces to a lower limit, the connection will be disconnected
forcibly).
You shall use the command cautiously.