Huawei Quidway S6500 Series, Руководство по управлению

Страница: 368 / 845

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Chapter 6 IP Routing Policy Configuration Commands
Huawei Technologies Proprietary
6-14
Example
# A if-match sub-statement is defined, which allows the routing information with routing
cost 8 to pass this if-match sub-statement.
[Quidway-route-policy] if-match cost 8
6.1.18 if-match interface
Syntax
if-match interface { interface-name | interface-type interface-number }
undo if-match interface
View
Route policy view
Parameter
interface-type : Specify interface type.
interface-number : Specify interface number.
interface-name : Specify interface name.
Description
Using if-match interface command, you can configure to match the route whose next
hop is designated interface. Using undo if-match interface command, you can cancel
the setting of matching condition.
By default, no if-match sub-statement is defined.
It matches the corresponding interface of route next hop when filtering route.
For the related commands, see if-match acl , if-match ip-prefix , if-match ip next-hop ,
if-match cost , if-match tag , route-policy , apply ip next-hop , apply cost , apply
local-preference , apply origin and apply tag .
Example
# Define one if-match sub-statement to match the route whose next hop interface is
Vlan-interface 1
[Quidway-route-policy] if-match interface Vlan-interface 1
6.1.19 if-match ip next-hop
Syntax
if-match ip next-hop { acl acl-number | ip-prefix ip-prefix-name }
undo if-match ip next-hop [ ip-prefix ]