Command Manual - STP
Quidway S6500 Series Ethernet Switches
Chapter 1 MSTP Configuration Commands
Huawei Technologies Proprietary
1-26
Where the link speed is the sum of the speed of the ports in unblocked status within the
aggregation links.
Example
# Configure the switch to calculate the default Path Cost of a port by the IEEE
802.1D-1998 standard.
[Quidway] stp pathcost-standard dot1d-1998
# Configure the switch to calculate the default Path Cost of a port by the IEEE 802.1t
standard.
[Quidway] stp pathcost-standard dot1t
1.1.28 stp point-to-point
Syntax
stp point-to-point
{
force-true
|
force-false
|
auto
}
undo stp point-to-point
View
Ethernet port view
Parameter
force-true
: Indicates the Ethernet port connected to a point-to-point link.
force-false
: Indicates the Ethernet port not connected to a point-to-point link.
auto
: Configure to automatically check if the link to the Ethernet port is a point-to-point
link.
Description
Using
stp point-to-point
command, you can configure the current Ethernet port (not)
to connect with point-to-point link. Using
undo stp point-to-point
command, you can
configure the link state to the default state in which MSTP automatically detects if the
link to the Ethernet port is point-to-point link.
By default, switch adopts
auto
mode.
The port not connected with the point-to-point link cannot transit fast.
The master ports of the link aggregation and the ports operating in full-duplex mode are
connected to the point-to-point link. You are recommended to keep the default settings
and let MSTP detect the link state automatically.
This configuration takes effect on the CIST and all the MSTIs. The settings of a port
whether to connect the point-to-point link will be applied to all the STIs where the port
belongs. Note that a temporary loop may be redistributed if you configure a port not
physically connected with the point-to-point link as connected to such a link by force.
Содержание Quidway S6500 Series
