LTE CPE B2368 User's
Guide
5 Wireless WiFi 2.4 / 5 GHz
Issue 01
Copyright © Huawei Technologies Co., Ltd.
34
Figure 5-1
One of the possible schemes wireless network
Figure 5-1
One of the possible schemes wireless network
The actual wireless network is shown in the dotted circle. In this example, device
AND
and
The actual wireless network is shown in the dotted circle. In this example, device
AND
and
The actual wireless network is shown in the dotted circle. In this example, device
AND
and
B
connect to the network through an access point (
AP)
and cooperate with other devices (eg. printer), and
B
connect to the network through an access point (
AP)
and cooperate with other devices (eg. printer), and
B
connect to the network through an access point (
AP)
and cooperate with other devices (eg. printer), and
B
connect to the network through an access point (
AP)
and cooperate with other devices (eg. printer), and
have access to the Internet. Your LTE modem is the access point (AP).
Each wireless network is governed by the following basic rules.
•
All devices on the wireless network must use the same SSID. SSID is the name of the wireless network. It is
an abbreviation of the English phrase Service Set Identifier, ie the identifier of the wireless network.
•
If there are two overlapping wireless networks should each transmit on a different channel.
Like radio stations and television channels used by each wireless network to send and receive information
specific channel or frequency.
•
All devices on the same wireless network must use security procedures compatible with the AP.
•
Security procedures prevent unauthorized devices to connect to a wireless network. It also protects the
information that is sent over a wireless network.
radio frequency channels
The radio frequency spectrum is allocated certain frequency bands for unlicensed, civilian use. For wireless
connectivity, these bands are divided into several channels. This allows the same place, there were many
wireless networks without interference. When networking you must select the channel you want to use.
Given that unlicensed spectrum available in each country are different, so the number of available channels.