HT Italia SOLAR300, Руководство пользователя, Страница: 80 / 160

SOLAR300 - SOLAR300N
EN - 78
CAUTION
For recordings ALWAYS use the external power supply even though the
instrument allows the operator to perform a recording using internal
batteries.
After starting a recording a preliminary real time evaluation about the situation on electrical
installation it’s important in order to perform a correct settings, using the predefined
configurations (see § 5.4.2.14) if necessary.
The below warning message can be shown by meter after pressing of
GO/STOP key:
Warning
Too many selected parameters
Fig. 107: Warning message of too many selected parameters
In this case of too many parameters were selected it is necessary to disable them inside
“Recordings Settings” section in order to start a correct recording.
After pressing
GO/STOP key a possible warning message window is shown by meter.
Inside this window message the internal item can be different as for type and number. This
warning message, which does not block the recording start, is important for user to correct
possible errors performed during meter’s setting:
Warning
Missed external adapter
Wrong phase sequence
Negative active powers
Wrong Vref voltage anomalies
Ok Cancel
Fig. 108: Warning message errors screen