HT Italia SOLAR300, Руководство пользователя

Страница: 60 / 160

SOLAR300 - SOLAR300N
EN - 58
5.4.2.7. General Parameters: sub-levels description
Press F1 key (or touch CLP/EXP at display) to expand or compress the sub-levels. The
parameters inside sub-levels are strictly depending on type of selected system (see §
5.3.1). As an example, below are shown the screens relative to a
three phase 4-wire system .
Similar consideration can be applied to any other selected system
Fig. 84: General Parameters sub-level - Three phase 4-wire system
Each parameter is always selectable independent from others. The below parameters
can be selected for recording in Single phase systems:
Parameters Description
Frequency Frequency of phases L1, L2, L3
Voltages
TRMS voltages L1-N, L2-N, L3-N, N-PE
TRMS voltages L1-L2, L2-L3, L3-L1
Currents TRMS currents L1, L2, L3, Neutral
Active Power & Energy Active power and energy L1, L2, L3, Total
Reactive Power & Energy
Reactive (inductive or capacitive) power and energy
L1, L2, L3, Total
Apparent Power & Energy Apparent power and energy L1, L2, L3, Total
Power Factor Power factor L1, L2, L3 Total
CosPhi
Power factor referred to fundamental of voltage and
current L1, L2, L3, Total
Table 6: Selectable parameters for Single phase system
Press SAVE or ENTER keys (or the smart icon ) to save each selection and confirm by
“Ok”. The main screen of is shown by meter at the end of the operation. Press ESC key
(or the smart icon ) to quit without saving and back to previous screens.