HT Italia SOLAR300, Руководство пользователя

Страница: 79 / 160

SOLAR300 - SOLAR300N
EN - 77
5.6. START A RECORDING
The meter is designed to start a recording in MANUAL or AUTOMATIC mode (the
Automatic only for NPV systems - see § 5.4.2.3) by pressing of
GO/STOP key. A recording
operation can be started exclusively under the following screens:

GENERAL MENU (with any selected icon)

Real time values (in any internal screen)
Fig. 104: Example of screens for recording starting
Before starting a recording press
ESC key (or the smart icon ) until you get a picture as
shown in Fig. 104.This operation can be performed in the below ways:

MANUAL : Recording will start at the following minute after pressing GO/STOP key.

AUTO : Only if the instrument is configured for NPV systems: When pressing the
GO/STOP key ( necessary ), the instrument remains in stand-by until
reaching the date/time set (see § 5.4.2.2) to start recording.
The waiting and recording run status are marked by meter with dedicated icons which are
present on the top right of display, as shown in below picture:
Fig. 105: Meter waiting for recording
Fig. 106: Meter in recording run
Press again
GO/STOP key to stop the recording run in any time. The icon shown in Fig.
106 disappear.