HSD ES779, Перевод оригинальной инструкции

Страница: 93 / 200

5 Installation and commissioning
HSD S.p.A. © - h0104k01a.fm120718
93
5 Installation and commissioning
5.1 Preliminary installation checks
Before carrying out any operations, MAKE SURE:
„
that no parts of the product have been damaged by impact or any other cause during transport
and/or handling;
„
that the connectors are undamaged.
5.2 Preparing the factory services
It is the responsibility of the customer to ensure the availability of the factory services (e.g.
electricity supply, compressed air supply, etc.).
The electricity supply line must have a sufficient power rating. The connection to the mains
electricity supply must be carried out by a qualified electrician.
The customer is responsible for the electricity supply to the product, as far as the
connectors.
The user must use a supply connector with a connection to an efficient equipotential
protection circuit .
The earthing system must comply with current standards in the country of
installation and must be checked regularly by qualified personnel.
The product must not be installed in places where there is a risk of explosion.
Installation must be performed in a sufficiently lit area.
5.3 Environmental work requisites
„ Temperature: from +5 to +40°C (41÷104°F).
„ Max. relative humidity : 50% (40°C/104°F).
„ Operating altitude: from 0 up to 1000 metres a.s.l. The motor power could decrease if this is
air cooled and if the machine is installed at high altitudes.
Maximum altitude: 3000 metres a.s.l..