HSD ES779, Перевод оригинальной инструкции, Страница: 21 / 200

2 Safety information
HSD S.p.A. © - h0115k01a.fm120718
21
2 Safety information
The product will operate in safety if it is installed and used by qualified personnel in compliance
with the recommendations and instructions provided in this manual or supplied by HSD's technical
engineers at the time of installation.
Tampering with the safety devices to perform unforeseen operation causes the onset of serious
danger to the operator.
The manufacturer will not be liable in any way for any damage to persons or property deriving from
the use of unqualified operators, unintended use or deliberately incorrect use of the products or
failure to comply with the safety requirements and recommendations listed below.
2.1 Safety regulations
„
Read the instruction manual carefully for assembly and maintenance before starting up, using,
performing maintenance or any other operation on the product.
„
Always comply strictly with the warning, danger and caution indications provided in the
manual, and with the safety signs affixed directly to the product.
„
Always use the personal protection devices foreseen by current regulations on safety at work.
„
Never work in the dark; use all the available lights and make sure that they are efficient.
„
Pay all due attention to what you are doing and take the necessary precautions before doing
anything.
„
Be careful, during the electrical installation, to not invert the phases.
2.2 Safety warnings for the fitting and use of tools
„
Never use deformed or cracked rotating tools.
„
Check the perfect equilibration of the rotating tools, their perfect sharpening and their
suitability for the work.
„
Never use tools beyond their speed limit, which is impressed on the surface of the tool or
indicated in some way by the manufacturer.
„
Before installing any tool in its seat make sure that the guide and centring surfaces have no
dents and are perfectly clean.
„
In each tool apply only the prescribed torque to screws, bolts, nuts and ferrules.