3.
Type
diskpart
, and then press
Enter
.
4.
Type
list disk
to determine the USB flash drive number or drive letter, and press
Enter
.
5.
Note the drive number or drive letter of the USB flash drive.
6.
Type
select disk <x>
, where <x> is the drive number or drive letter of the USB flash drive, and press
Enter
.
7.
Type
clean
to delete the data from the USB flash drive, and press
Enter
.
8.
Type
create part pri
to create a new primary partition in the USB flash drive, and press
Enter
.
9.
Type
select part 1
to select the partition that you just created , and press
Enter
.
10.
To format the partition as FAT32, type format fs=fat32 quick, and press
Enter
.
IMPORTANT:
Since the server platforms are configured with Unified Extensible Firmware Interface (UEFI), you
must format the USB flash drive as FAT32 instead of NTFS. To format the partition as FAT32, type:
format fs=fat32 quick and press
Enter
.
11.
Type
active
to mark the partition as active and press
Enter
.
12.
Type
Exit
to quit diskpart context commands and press
Enter
.
13.
Copy the installation files included in the disc image file (ISO) to the root of the USB flash drive.
Creating a DVD with an image file from HPE Software Depot
Follow the steps to create a system recovery DVD with an image file from HPE Software Depot:
1.
Insert a blank
dual layer
DVD in the drive.
2.
Locate the ISO image file on your system and then double-click it.
3.
The Windows Disk Image Burner window appears.
4.
Select the disk burner that you want to use. This is applicable only if you have more than one disk burners.
5.
Select
Verify disc
after burning to verify that the ISO image has burned correctly. It is recommended to
verify the disc to ensure that the ISO burns correctly to the DVD.
6.
Click
Burn
.
7.
On completion, the appropriate status is displayed on the screen.
Restoring the factory image with a DVD or USB flash device
Prerequisite
: Disconnect any external storage from the system prior to restoring the HPE StoreEasy system.
1.
For direct access, insert the System Recovery DVD or a bootable USB flash device (prepared with a
System Recovery image).
2.
For remote management access, connect to the server using iLO from a client PC. Insert the System
Recovery DVD in the client PC or attach a bootable USB flash device that is prepared with a System
Recovery image.
3.
Reboot the server and select F11 during the boot. Manually select the device which has the recovery
media.
4.
Click
HPE StoreEasy System Recovery
.
96
Troubleshooting, servicing, and maintenance
Содержание StoreEasy 1X60 Storage
Страница 53: ...Volumes 53...
Страница 55: ...You can perform the following operations in the File Shares screen File Shares 55...