CAUTION:
Do not drop the drive cage on the system board. Dropping the drive cage on the system board
might damage the system or components. Remove all drives and use two hands when installing or
removing the drive cage.
a.
Locate the alignment pins on the rear of the drive cage.
b.
Align the pin on the rear left of the drive cage to the server and then insert the pin.
c.
Gently lower the opposite side of the drive cage.
d.
Pull the plunger pin on the rear right of the drive cage and then lower the drive cage until the plunger
pin engages.
1
3
2
15
11.
Install drives or drive blanks.
12.
Push down on the latches to lower the drive cage into place.
Hardware Components of HPE StoreEasy 1X60 Storage system
149
Содержание StoreEasy 1X60 Storage
Страница 53: ...Volumes 53...
Страница 55: ...You can perform the following operations in the File Shares screen File Shares 55...