manualshive.com logo in svg

HPE StoreEasy 1X60 Storage, Руководство администратора, Страница: 165 / 183

Поделиться
Скачать
HPE StoreEasy 1X60 Storage Скачать руководство пользователя страница 165

HPE Trusted Platform Module 2.0 Gen10 option

Overview

Use these instructions to install and enable an HPE TPM 2.0 Gen10 Kit in a supported system. This option is
not supported on Gen9 and earlier systems.

This procedure includes three sections:

1.

Installing the Trusted Platform Module board.

2.

Enabling the Trusted Platform Module.

3.

Retaining the recovery key/password.

HPE TPM 2.0 installation is supported with specific operating system support such as Microsoft

®

 Windows

Server

®

 2012 R2 and later. For more information about operating system support, see the product

QuickSpecs on the Hewlett Packard Enterprise website (

http://www.hpe.com/info/qs

). For more information

about Microsoft

®

 Windows

®

 BitLocker Drive Encryption feature, see the Microsoft website (

http://

www.microsoft.com

).

CAUTION:

If the TPM is removed from the original and powered up on a different , data stored in the TPM including
keys will be erased.

IMPORTANT:

In UEFI Boot Mode, the HPE TPM 2.0 Gen10 Kit can be configured to operate as TPM 2.0 (default) or
TPM 1.2 on a supported . In Legacy Boot Mode, the configuration can be changed between TPM 1.2
and TPM 2.0, but only TPM 1.2 operation is supported.

HPE Trusted Platform Module 2.0 Guidelines

CAUTION:

Always observe the guidelines in this document. Failure to follow these guidelines can cause hardware
damage or halt data access.

When installing or replacing a TPM, observe the following guidelines:

• Do not remove an installed TPM. Once installed, the TPM is bound to the system board. If an OS is

configured to use the TPM and it is removed, the OS may go into recovery mode, data loss can occur, or
both.

• When installing or replacing hardware, Hewlett Packard Enterprise service providers cannot enable the

TPM or the encryption technology. For security reasons, only the customer can enable these features.

• When returning a system board for service replacement, do not remove the TPM from the system board.

When requested, Hewlett Packard Enterprise Service provides a TPM with the spare system board.

• Any attempt to remove the cover of an installed TPM from the system board can damage the TPM cover,

the TPM, and the system board.

• If the TPM is removed from the original and powered up on a different , data stored in the TPM including

keys will be erased.

HPE Trusted Platform Module 2.0 Gen10 option

165

Содержание StoreEasy 1X60 Storage
























































































































































































Отзывы:

Нет отзывов