HPE StoreEasy 1X60 Storage Скачать руководство пользователя страница 78

Страница: 78 / 183

Service:

Indicates that the interface is available for HPE StoreEasy

management console operations.

Once the request is received to start a network interface, the resource
tries to bring the interface online.

Stopping:

Indicates that the interface is in the process of moving to an

OK, warning, critical or unknown state. Interface being brought to an
orderly stop.

Warning ( )

Degraded:

Indicates that one of the tasks is failed or the element is

responding to commands, but is not running in an optimal operating
state.

Stressed:

The element is functioning, but needs attention.

Critical ( )

Predictive Failure:

Element is functioning nominally but predicting a

failure shortly.

Error:

Indicates that the task is in an unhealthy state that prevents

further execution.

Non recoverable error:

Element is in non-recoverable error.

Unknown (

)

Lost Communication:

Element is known to exist and has been

contacted successfully in the past, but is unreachable.

Unknown:

This indicates the unknown state of the network interface.

The unknown error occurs if there is a loss of communication or if the
state of the network interface is unknown.

No Contact:

The monitoring system has knowledge of this element, but

has never been able to establish communications with it.

Connection
Status

Unknown (

)

Unknown:

This indicates the unknown state of the network interface.

The unknown error occurs if there is a loss of communication or if the
state of the network interface is unknown.

OK (

)

Connected:

Indicates that the network interface is connected.

Disabled

Disconnected:

Indicates that the network interface is disconnected.

Editing a Network Interface

The

Edit Network Interface

page allows you to change the name and the IP settings of the existing Network

Interface.

To edit the Network Interface, perform the following

Click

Settings

Networking

Network Interfaces

from the left navigation menu in the management

console of the HPE StoreEasy.

Click on the available network interfaces that you choose to modify.

Click edit (

) icon on top right-side of the

Network Interface

page.

Editing a Network Interface

Содержание StoreEasy 1X60 Storage
























































































































































































Результаты поиска

Содержание StoreEasy 1X60 Storage

Отзывы:

Похожие инструкции для StoreEasy 1X60 Storage

Бренды по названию

Популярные бренды

HPE StoreEasy 1X60 Storage, Руководство администратора

Результаты поиска

Содержание StoreEasy 1X60 Storage

Отзывы:

Похожие инструкции для StoreEasy 1X60 Storage

Бренды по названию

Популярные бренды