303
IPsec SA negotiation failed because no matching IPsec
transform sets were found
Symptom
1.
The
display ike sa
command shows that the IKE SA negotiation succeeded and the IKE SA is
in RD state, but the
display ipsec sa
command shows that the expected IPsec SA has not
been negotiated yet.
2.
The following IKE debugging message appeared:
The attributes are unacceptable.
Or:
Construct notification packet: NO_PROPOSAL_CHOSEN.
Analysis
Certain IPsec policy settings are incorrect.
Solution
1.
Examine the IPsec configuration to see whether the two ends have matching IPsec transform
sets.
2.
Modify the IPsec configuration to make sure the two ends have matching IPsec transform sets.
IPsec SA negotiation failed due to invalid identity information
Symptom
1.
The
display ike sa
command shows that the IKE SA negotiation succeeded and the IKE SA is
in RD state, but the
display ipsec sa
command shows that the expected IPsec SA has not
been negotiated yet.
2.
The following IKE debugging message appeared:
Notification INVALID_ID_INFORMATION is received.
Or:
Failed to get IPsec policy when renegotiating IPsec SA. Delete IPsec SA.
Construct notification packet: INVALID_ID_INFORMATION.
Analysis
Certain IPsec policy settings of the responder are incorrect. Verify the settings as follows:
1.
Use the
display
ike
sa verbose
command to verify that matching IKE profiles were found in
IKE negotiation phase 1. If no matching IKE profiles were found and the IPsec policy is
referencing an IKE profile, the IPsec SA negotiation fails.
# Verify that matching IKE profiles were found in IKE negotiation phase 1.
<Sysname> display ike sa verbose
-----------------------------------------------
Connection ID: 3
Outside VPN:
Inside VPN:
Profile:
Transmitting entity: Responder
-----------------------------------------------
Local IP: 192.168.222.5
Local ID type: IPV4_ADDR
Local ID: 192.168.222.5
